MOV Long Life


MOV Long Life greases tested by EPRI for high temperature MOV’s and for bearings in Lube Notes for December 2006. Both did very well in comparison to the alternatives, especially when all the characteristics were considered.

Note Number 1, High Temperature Grease Evaluation: “The MOV LL result at the stem nut temperature of 85°C (185°F) warrants consideration in future testing. Not only does it appear that it will retain oil better, but it also has better oxidation stability and consistency retention (remaining a grade 2) than the other lubricants evaluated.”

Note Number 3, Comparison of Roller Bearing Greases: “We believe that MOV LL will prove to be superior in antirust based on other, more rigorous tests. This feature is important in areas of high humidity near an ocean. Given that a bearing failure occurred due to a weld seize, there is a comfort in choosing MOV LL that has a significantly higher weld point and load-carrying ability.”

Click here for more information

What You Need to Know about Oil & Greases and Compatibility Testing

See the movement of MOV Long Life Grease in a Limitorque SMB actuator



Tech Data

LongLife 00
LongLife 0
LongLife 1
LongLife 2
TN Dropping Point





To order MOV Long Life, MOV Extra or VSG (biodegradable), call Canoil Canada Ltd. at 905-820-2022 or Toll Free 1-855-520-2022.

For US sales of MOV Long Life and MOV Extra other options call

at 770 426-6070 or 800 536-6070, Fax 770 426-6191.

Pinnacle Actuation at 800-829-8145 and Fax 770-926-1637.

The Slover Group at 713-468-1795 and Fax 713 932-6874.


MOV Long Life Grease

Improved Availability of MOV Long Life – USA

MOV LONG LIFE – Limitorque SMB Gearbox Grease – Service Lives and Cost Savings

Motor Operated Value User’s Group (Note: these require being a MUG member)

Position paper 02G-JO1, Equivalent Replacement Evaluation for MOV Gearbox Lubricant

2003 MUG Conference All in One Grease – An Update On MOV Long Life

MOV Stem Lubricant Aging Research

2004 MUG Conference MOV Long Life Limit Switch Applications (not posted yet, contact us for a copy)

2005 MUG Conference MOV Long Life Grease Condition Monitoring Tests (not posted yet, contact us for a copy)

EPRI (Electric Power Research Institute)

Comparative Analysis of Nebula and MOV Long Life Greases for Limitorque Main Gearbox Applications, Report 1003483, December 2002. Summary only, EPRI member can download.

NRC (Nuclear Regulatory Commission) MOV Stem Lubricant Aging Research, March 2003, NUREG/CR-6806

Click “Begin Adams Search”, then in the search box type in ML030780590 to get the report. If you want a downloadable file click the icon under the “Image File”.

STLE (Society of Tribologists and Lubrication Engineers) 2016 Annual Meeting


Canoil Ltd.
Toll free: 855-520-2022
Phone: 905-820-2022
Fax: 905-820-9119
Actuator Specialties, Michigan
734 269-6002

The Slover Group
Houston, TX
Phone: 713-468-1795
Fax: 713-932-6874

Georgia Western*, Georgia
800 536-6070 or 770 426-6070

Pinnacle Actuation, Georgia
800 829-8145

Action Automation
Alsip, IL
Phone: 708-388-3232
Fax: 708-388-3235
Valves & Automation Inc
555 Executive Drive, Willowbrook, IL
630 323-6677

* Usually have MOV Long Life Grades 0,1 & 2 in stock as well as MOV Extra Grades 0 &1




Approval Other Actuators.pdf


COG (Candu Owners Group)

COG EQ and Mixing Approval.pdf

COG Stems.pdf

MUG (Motor Operated Valve Users’ Group)

MUG Position Paper.pdf

EPRI (Electric Power Research Institute)

EPRI SMB Single Grease Approval

EPRI Main Gearbox EQ Approval

EPRI Limit Switch Approval

MOV Long Life 9000

Grease Testing

Commercial Grade Dedication

TechNote Dropping Pt

TechNote FTIR

TechNote Penetration

TN Dropping Point



Q&A MOV Long Life Eco


Question & Answers MOV Long Life Grease

1. What’s special about MOV Long Life grease?

It was reported in 1994 that some stations were experiencing problems with the calcium complex that had been used historically. It turned out that while ‘approved’ that its last formulation had some disadvantages. We then started working with stations, EPRI and others to develop a grease that would work better in the main gearbox of valve actuators and also in the limit switch gearbox and on the stems. The stations in particular wanted a grease that would last much longer before it became too hard for further service. This has been accomplished. MOV Long Life is recommended by MUG, extensively tested by COG and EPRI and is the only approved grease for safety related Limitorque MOV’s. The Grade 0 (softer) is used as factory files, many stations use a stiffer Grade 1 for the gearboxes and the stems and an even stiffer Grade 2 is available for bearings. Reports so far are that MOV Long Life lasts at least 3 times as long as the now obsolete product.

2. Who’s using it?

Users include many US nuclear stations as well as those in Canada, Sweden and Spain. Work in underway on applications in France and Japan.

3. How does it perform?

MOV Long Life has outstanding oxidation resistance, as well as excellent resistance to working (polyurea greases do not as a rule) and provides much better corrosion protection and wear resistance. MOV Long Life for EQ applications has been radiation tested to over 220 Mrad and also stiffens up in contact with water so it stays in place better.

4. Who has tested it?

MOV Long Life has been independently tested by a number of utilities and by outside organisations. This data is available in most cases and there are links on the website to EPRI testing and the MUG Position Paper.

5. Is it compatible with our current grease?

The calcium sulphonate thickener is compatible with the calcium complex grease recommended previously by Limitorque. This has been confirmed in testing and it has been stated that they can mixed even for safety related valves. This is not the same as other greases and the old calcium complex it is reportedly not compatible with the other greases offered by the previous manufacturers. However, while adding MOV Long Life will tend to be better than adding more of the obsolete grease, to get all the benefits of the better performance remove as much of old grease as possible.

6. It costs more so is it worth it?

MOV Long Life uses an expensive baseoil and it is still a low volume product however, the main cost is associated with the extra QA and the questions arising from it’s use at nuclear plants. In addition, there are the years of previous work and testing that have to be recovered. Given the performance and the longer life it is indeed worth it. For fossil applications and for non-safety related equipment there is MOV Extra. This has a good but less expensive baseoil, it is made in large volumes and it has a further advantage of better mobility at low temperatures.

7. What is its shelf life?

The shelf life of a product is open to some interpretation and for power plants there is little guidance on what this means. However, some military specifications do require longer shelf lives and specify the testing. In most cases a time is given to reflect when the manufacturer believes that the grease will still meet the typical performance specifications and be within the NLGI Grade requirements. For the previous grease this was stated as being only 1 year! This might because of the age hardening and while the grease can obviously still perform at time intervals many times this amount it does mean that extra testing on even product from unopened pails might be required. The stated shelf life of MOV Long Life is 5 years. Beyond this time it is recommended that the pails be examined for oil separation and if present to mix it back in. The grease can also be tested for penetration if required or other tests if contamination is suspected.

8. What can be used for high radiation applications?

MOV Long Life has been radiated tested by at least four different agencies and it has performed very well. The EPRI testing was to over 220 Mrad. In either wet or dry applications it should do well and for bearings or other similar applications the stiffer Grade 2 might be more suitable. It can also be used for gear couplings although it will not be as good in centrifugal separation as the specialty products but it should do better in other areas.

9. Can it be used in the Limitorque limit switch gearbox?

MOV Long Life has been compared against the two current products and it outperformed them in almost every regard. It certainly should not suffer from the age hardening of one of current products (see NRC report) and yet provides good wear protection and much better corrosion protection. Given that the grease is this application is seldom changed remove as much of the old grease as possible and do not mix. MOV Long Life is being used now for this application and the 2003 and 2004 MUG presentations.

10. Can MOV Long Life be used on stems?

MOV Long Life provides good wear protection and in testing by others it certainly appears to perform better than the now obsolete calcium complex grease. The Grade 1 or even the Grade 2 would be preferred. Testing by others has shown no rate of loading effects and no significant changes in the coefficient of friction. Stems testing by EPRI is currently underway (2004).